wiki.zeratul.org

User Tools

Site Tools

You are here: start » hardware » google-nexus7
Trace:
hardware:google-nexus7

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hardware:google-nexus7 [2013/08/22 03:04] – [Get root] styblahardware:google-nexus7 [2016/04/17 01:48] (current) – [Transfer files between 'droid and Linux] fix the fixme stybla
Line 1: Line 1:
 ====== Google Nexus 7 ====== ====== Google Nexus 7 ======
  
-All information here is related to 2012 version of Google Nexus 7 manufactured by ASUS. +<WRAP center round alert 60%> 
-I don't take any responsibility for bricked or destroyed hardware. Also, some actions here +I don't take any responsibility for bricked or destroyed hardware. Also, some actions described here 
 may void your warranty. You have been warned! may void your warranty. You have been warned!
 +</WRAP>
  
-99% of information here can be found on intranets. These are, pretty much, personal notes.  +All information here is related to 2012 version of Google Nexus 7 manufactured by ASUS and how to do various things  
-Respect to all those people for all the work!+with, or to, it from GNU/Linux. 99% of information here can be found on intranets. These are, pretty much, personal notes.  
 +Respect to all those people for all work they've done!
  
 Speaking of which, here are some links: Speaking of which, here are some links:
Line 31: Line 33:
 ==== Unlock boot loader ==== ==== Unlock boot loader ====
  
-<note important>Unlocking boot loader will wipe all your data. Therefore, you're advised to backup your data before proceeding further.</note>+<WRAP center round important 60%> 
 +Unlocking boot loader will wipe all your data. Therefore, you're advised to backup your data before proceeding further. 
 +</WRAP>
  
   * you need Android SDK to get ''adb'' and ''fastboot''. Look for ''adt-bundle-linux-x86_64''. Note, however, despite it's 2013, "compat" libs are still required by 64bit version(what a shame!). This is covered by installing ''ia32-libs'' on Ubuntu. I don't know about other distros.   * you need Android SDK to get ''adb'' and ''fastboot''. Look for ''adt-bundle-linux-x86_64''. Note, however, despite it's 2013, "compat" libs are still required by 64bit version(what a shame!). This is covered by installing ''ia32-libs'' on Ubuntu. I don't know about other distros.
   * enable USB debug mode by:   * enable USB debug mode by:
-    * go into Settings -> About tablet and click on ''Build number'' seven times +    * go into //Settings// -> //About tablet// and click on //Build number// seven times 
-    * go into Settings -> Developer options and enable ''USB debugging''+    * go into //Settings// -> //Developer options// and enable //USB debugging//
   * ''# ./adb devices''   * ''# ./adb devices''
  
Line 44: Line 48:
 </code> </code>
  
-  * ''# ./adb reboot-bootloader'' or, I guess, this would do too: power off Nexus 7, hold simultaneously Volume down and Power buttons+  * ''# ./adb reboot-bootloader'' or, I guess, this would do too: power off Nexus 7, hold simultaneously buttons //Volume Down//, //Home// and //Power//
   * ''# ./fastboot oem unlock''   * ''# ./fastboot oem unlock''
-  * press Power button to unlock boot loader+  * press //Power// button to unlock boot loader
  
  
 ==== Replace recovery image ==== ==== Replace recovery image ====
  
-  * enable ''USB debugging'', if you haven't already+  * enable //USB debugging//, if you haven't already
   * ''# ./adb devices''   * ''# ./adb devices''
   * ''# ./adb reboot-bootloader''   * ''# ./adb reboot-bootloader''
Line 58: Line 62:
   * ''# ./fastboot flash recovery <path_to_image>''   * ''# ./fastboot flash recovery <path_to_image>''
   * ''# ./fastboot erase cache''   * ''# ./fastboot erase cache''
-  * use Volume Down/Up buttons to choose "Recovery mode" and Power button to boot into recovery mode+  * use //Volume Down/Up// buttons to choose //Recovery mode// and //Power button// to boot into recovery mode
   * once in ClockworkMod   * once in ClockworkMod
-    * go into "mounts and storage" and mount /system+    * go into //mounts and storage// and mount /system
     * also, I think I had to format /cache partition(?)     * also, I think I had to format /cache partition(?)
-    * go into "backup and restore" and "backup" and "create image zip"+    * go into //backup and restore// and //backup// and "create image zip"
     * you get get these files off the device by ''# ./adb pull <remote_file> <local_file>'' - highly recommended for later use, resp. restore     * you get get these files off the device by ''# ./adb pull <remote_file> <local_file>'' - highly recommended for later use, resp. restore
     * you'll be asked on exit whether to install ClockworkMod permanently or not - yes, to keep; no, to use only once. This can be reversed via backup/image(?)     * you'll be asked on exit whether to install ClockworkMod permanently or not - yes, to keep; no, to use only once. This can be reversed via backup/image(?)
 +
 +
 ==== Get root ==== ==== Get root ====
  
Line 72: Line 78:
   * in ClockworkMod, ''install zip'' -> ''choose zip from sdcard'' and locate SuperSU   * in ClockworkMod, ''install zip'' -> ''choose zip from sdcard'' and locate SuperSU
   * reboot device and you should have SuperSU icon in your menu   * reboot device and you should have SuperSU icon in your menu
 +
 +
 ===== How to ... ===== ===== How to ... =====
  
Line 77: Line 85:
 ==== Enable developer menu ==== ==== Enable developer menu ====
  
-  - Go to Settings -> About tablet +  - Go to //Settings// -> //About tablet// 
-  - Click on "Build number" seven times+  - Click on //Build number// seven times
  
  
 ==== Enable USB debugging ==== ==== Enable USB debugging ====
  
-  - Go to Settings -> Developer options +  - Go to //Settings// -> //Developer options// 
-  - enable "USB debugging"+  - enable //USB debugging//
  
  
 ==== Change USB connection type ==== ==== Change USB connection type ====
  
-  - Go to Settings -> Storage +  - Go to //Settings// -> //Storage// 
-  - open "USB computer connection" menu(three vertical dots in the right top corner of the screen)+  - open //USB computer connection// menu(three vertical dots in the right top corner of the screen)
   - choose either MTP or PTP mode   - choose either MTP or PTP mode
  
  
 ==== Transfer files between 'droid and Linux ==== ==== Transfer files between 'droid and Linux ====
 +
 +I've been using [[https://github.com/hanwen/go-mtpfs|go-mtpfs]] to transfer files between 'droid and Linux.
 +
 +
 +===== Alternatives to 'droid =====
  
 FIXME FIXME
  
  
 +==== Arch Linux ====
 +
 +  * [[https://docs.google.com/document/d/1G9vF5v2TN2c6ocyb_hmD1ve7OK4GdCP84rfaXgiLmB4/edit|How to install Arch Linux on Nexus 7]]
 +  * [[http://forum.xda-developers.com/showthread.php?t=2368304|XDA Dev forum thread related to Arch Linux on Nexus 7]]
 +
 +
 +==== Ubuntu ====
 +
 +  * [[https://wiki.ubuntu.com/Nexus7/Installation]]
 +
 +
 +===== Links =====
  
 +  * [[https://wiki.ubuntu.com/Nexus7
 +  * [[http://www.nexus7tablethelp.com/2012/07/connect-nexus-7-to-linux-via-mtp-using.html]]
 +  * [[http://thegreyhats.blogspot.cz/2012/12/nexus-7-file-transfer-with-linux-via-usb.html]]
 +  * [[https://wiki.archlinux.org/index.php/MTP]]
 +  * [[https://sourceforge.net/projects/libmtp/]]
 +  * [[https://github.com/hanwen/go-mtpfs]]
 +  * [[http://hanwen.home.xs4all.nl/public/software/go-mtpfs/]]
 +  * [[http://grey-olli.livejournal.com/697276.html]]
 +  * [[http://forums.androidcentral.com/google-nexus-7-2012-rooting-roms-hacks/200444-guide-release-kraken-rooting-hacking-your-nexus-7-a.html]]
 +  * [[http://forums.androidcentral.com/google-nexus-7-2012-rooting-roms-hacks/189900-guide-mac-pc-linux-4-2-unlock-root-flash-recovery.htm]]
hardware/google-nexus7.1377158675.txt.gz · Last modified: 2013/08/22 03:04 by stybla