Differences

This shows you the differences between two versions of the page.

--- hardware:samsung-galaxy-s3 [2013/08/23 03:56] – [Tizen] correct a typo stybla
+++ hardware:samsung-galaxy-s3 [2016/04/17 01:43] (current) – Use WRAP plugin stybla
@@ Line 1: / Line 1: @@
 ====== Samsung Galaxy S3 ======
-<note warning>I'm not responsible for any bricked devices! Some actions described here may void your waranty! You have been warned!</note>
+<WRAP center round alert 60%>
+I'm not responsible for any bricked devices! Some actions described here may void your waranty! You have been warned!
+</WRAP>
 All information here relate to international version of Samsung Galaxy S3(GT-I9300). 99% of information can be found on intranets.
@@ Line 96: / Line 98: @@
-==== Get into Restore mode ====
+==== Get into Recovery mode ====
   * hold down //Volume Up// + //Home// + //Power// buttons
   * red exclamation mark appears in the top left corner of the screen
+  * ''# ./adb reboot recovery'' will work as well
@@ Line 106: / Line 109: @@
   * hold down //Volume Down// + //Home// + //Power// buttons
   * or via 3x100K resistors in series connected to the two pins closest to the headphone jack on the USB port(unverified)
+  * ''# ./adb reboot-bootloader'' will work as well
-===== ClockworkMod, root =====
+===== ClockworkMod, root, CyanongenMod =====
+==== ClockworkMod ====
+  * get CWM [[http://www.clockworkmod.com/rommanager|here]]
+  * reboot SGS3 into ODIN mode
+  * # heimdall flash --RECOVERY <path_to_CWM> --no-reboot
+  * reboot SGS3 into recovery mode manually
+  * once in, create full backup of your phone and off-load it via ''adb''
+==== Get root on S3 ====
+It's fairly easy:
+  * boot into ClockworkMod recovery
+  * push SuperSU(search xda-dev forums) via ''adb''
+  * install image from zip
+==== CyanongenMod ====
+There is not much to be written about CM as it's all described [[http://wiki.cyanogenmod.org/w/Install_CM_for_i9300|here]].
+CM works on SGS3, however I was scared off by contacts, "you must create an account" and the fact camera didn't work for some
+reason(despite not being on bug list; might have been mistake on my part).
+  * download pre-build CM release or create your own
+  * reboot phone into CWM recovery
+  * push CM release via ''adb''
+  * //install zip//
+  * //wipe data + factory reset//
+  * reboot
+It's possible CM will stuck in an endless loop on boot up. Possible fix is to do //wipe data + factory reset//, //wipe /cache//, //wipe dalwik//.
+At least this did trick for me.
@@ Line 155: / Line 192: @@
 Information can be found at [[https://wiki.ubuntu.com/Touch/Devices/i9300]]. However, it seems there are some issues and phone
 isn't much of use on the phone part. This isn't much of a surprise.
+===== Links =====
+There seems to be a lot of written about SGS3 on intranets and quite a lot of useful information too:
+  * http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-linuxubuntu/
+  * http://www.teamandroid.com/2013/04/02/update-galaxy-s3-i9300-xxemc2-android-412-jelly-bean-official-firmware/
+  * http://www.teamandroid.com/2013/04/02/update-galaxy-s3-i9300-xxemc2-android-412-jelly-bean-official-firmware/
+  * http://forum.xda-developers.com/showthread.php?t=2098642 - keypad codes
+  * http://www.smartphonejam.com/2012/06/how-to-return-back-samsung-galaxy-s3-to.html - nice elaborate on stock ROM
+  * http://www.android.gs/root-samsung-galaxy-s3-with-cwm-recovery-and-supersu/